Black Box 5000 manual Data-Channel Configuration

			CHAPTER 9: Data-Channel Configuration
	MICOM Voice	ENABLE
	Table 9-3. Sync Channel Characteristics (continued)
Option	Protocol	Default	Description
DSR Control	DLC	NORMAL	When set to NORMAL, remote DTR changes to
	ASCII Bisync	NORMAL	appear on the local DSR. When set to FORCED
	EBCDIC Bisync	NORMAL	ON, remote DTR changes are ignored. The local
	H-P Sync	NORMAL	DSR is forced on when the local DTR is on.
	RTS/CTS	NORMAL
	Sync-Pad	NORMAL
	MICOM DLC	NORMAL
	MICOM Voice	NORMAL
	Fast Packet	NORMAL
	TDM	NORMAL
Priority	DLC	LOW	Sync channels are defaulted to low priority to give
	ASCII Bisync	LOW	precedence to voice/fax channels (which are
	EBCDIC Bisync	LOW	defaulted to high priority). Regardless of priority
	H-P Sync	LOW	setting, a sync channel will always take precedence
	RTS/CTS	LOW	over an async channel. Putting a sync channel on
	Sync-Pad	LOW	high priority will give it equal precedence to a
	MICOM DLC	LOW	voice/fax channel.
	MICOM Voice	LOW

Figure 9-4. Sync Data Rates for the Multiserver 5000

Protocol	Data Rate (bps)
DLC	1200 to 38,400
ASCII Bisync	1200 to 38,400
EBCDIC Bisync	1200 to 38,400
H-P Sync	1200 to 38,400
RTS/CTS	1200 to 38,400
Sync-Pad	1200 to 38,400
MICOM DLC	1200 to 19,200
MICOM Voice	9600 to 14,400
Fast Packet	1200 to 56,000
TDM	1200 to 48,000

89