|
| Appendix D: Messages |
| Screen Display Messages | |
Message | Message Type | Explanation |
|
|
|
ISU LOCAL LOOPBACK | Diagnostic | The ISU on link ci has been placed in local |
ACTIVE LINK # ci |
| loopback. |
ISU LOCAL | Diagnostic | This test puts the local ISU on link ci in |
LOOPBACK WITH TP |
| loopback, then verifies the operation of the |
ACTIVE LINK # ci |
| ISU by sending and receiving the test pattern. |
ISU TEST PATTERN | Diagnostic | The |
ACTIVE LINK # ci |
| ci has been activated. |
ISU TEST | Diagnostic | The test for the ISU on link ci has been |
TERMINATED LINK # cl |
| terminated. |
ni LAN MODULE | Info | The LAN module in ml is not available for use. |
LOCATION [ml] DOWN |
|
|
ni LAN MODULE | Info | The LAN module in ml is operating and |
LOCATION [ml] UP |
| available. |
ni LEASED LINE CONNECTION | Event | ADB has completed the leased line connection |
MADE LINK ci |
| for link ci. |
ni LEASE LINE OUT OF | Event | The modem is unable to communicate with the |
SERVICE LINK # ci |
| remote modem over the leased lines. |
ni LEASE LINE | Event | The modem is operating on the leased lines |
RETRY LINK ci |
| while the dial lines are still established. ADB mode |
|
| is enabled. |
ni LINE ALARM ci | Alarm | Link ci at node ni has a line alarm, indicating a high |
|
| line error rate. |
LINK DOWN ci | Alarm | The local Multiserver unit has timed out (40 |
|
| seconds) waiting for sync to be acquired on link ci. |
|
| Check the cabling, modem, remote Multiserver unit, |
|
| or feeder mux for errors. |
LOCAL ANALOG LOOP | Diagnostic | The local analog transmit signal is being |
LINK # ci |
| looped back into the local analog receiver. |
LOCAL | Diagnostic | Both the local analog and VF loopbacks are |
LOOP LINK # ci |
| being run. |
LOCAL | Diagnostic | This test includes both DTE and digital |
LOOP LINK # cl |
| loopback tests. |
LOCAL CHANNEL | Info | The Local Channel Configuration Menu cannot |
CONFIGURATION DISABLED |
| be accessed by the async port requesting it. |