Black Box 5000 manual Screen Display Messages

		Appendix D: Messages
	Screen Display Messages
Message	Message Type	Explanation
ni DIALING TX SECONDARY	Info	The modem is dialing the secondary TX dial
LINK # ci		line number. This usually indicates that the call to
		the primary TX number cannot be completed (the
		number is busy, no answer, etc.). This message is
		displayed by the call-originating modem.
ni DIAL LINE	Event	The dial line is dropped because of bad lines,
DROPPED LINK ci		DTR dropped, or RLSD lost.
DISABLED	Info	This function is disabled.
<DISCONNECTED>	Dialog	The connection has been broken. Sent to call
		originator only when switching is used (not for force-
		connections).
DISCONNECT n/c n/c	Event	A pair of ports has been disconnected.
ni DUPLICATE NODE-ID ci	Info	Two nodes in the network have the same ID.
<ENTER CLASS>	Dialog	Asks for the destination class name.
<ENTER CLASS	Dialog	Asks for the password associated with the
PASSWORD>		destination port’s class. If no password is
		configured for the class, the user should type a
		<cr>.
<ENTER PASSWORD>	Dialog	Asks for a password associated with the signed on
		port.
ni FORCED DIAL	Event	The modem at node ni on link ci is configured
LINK ci		for forced dial mode.
ni FORCED LEASE	Event	The modem at node ni on link ci is configured
LINK ci		for forced lease mode.
FOX TEST ACTIVE	Diagnostic	An async channel output test has been activated.
ILLEGAL INPUT	Info	The entry, as received, cannot be executed. This
		could be caused by an incorrect password, incorrect
		broadcast message, or voice/fax extension number
		that is too long.
ILLEGAL SELECTION	Info	The number entered is not on the list of items of the
		displayed menu.
<INCOMPATIBLE>	Dialog	The attempted connection is not compatible with the
		configuration.

225