Black Box 5000 manual 156

Multiserver 5000

		Table 11-7. Status/Statistics (continued)
	Option	Description
8.	Channel Statistics	Channel Statistics are part of the System Statistics (see option 7 above). When this
		option is chosen, the current channel statistics for the node are displayed. Voice
		channels and integral devices are not displayed with this menu.
		Select this option and the following prompt appears:
		ENTER NODE-ID (^X TO ABORT):
		Enter the node ID. Press <cr>. A demand report of the Channel Statistics is displayed.
		The current percentage of system buffers used by each channel is displayed.
		If a buffer overflow occurred, ** is displayed (in a period report only) for the channel
		most likely to have caused the buffer overflow. For a period report, this displays the
		maximum percentage of system buffers used by the channel since the last reporting
		interval. If no reporting interval is set, the statistics are reset every 60 minutes.
9.	Switch Statistics	Switch Statistics are part of the System Statistics (see option 7 above). When this
		option is chosen, the following are displayed: Each class number, the class name, the
		number of connects, connect failures, and the number of channels that have been in
		queue since the last period. All 64 classes will be displayed, whether or not they are
		configured. You can return to the Status/Statistics menu at any time just by pressing X.
		The Switch Statistics display is part of the System Statistics periodic and demand
		reports. Switch Statistics Reporting is option 5 of the Command Facility Parameters
		menu. It must be set to ON for the Switch Statistics to appear as part of the Systems
		Statistics reports. See Section 11-3, Configuring the Command Facility, and
		Table 11-3for more information.
10. PROM ID		Displays the PROM set number of the CommPak cartridge. The last character in the
		number is the revision level.
11. Voice/Fax		This option displays up-to-the-minute voice/fax statistics accumulated since midnight.
	Daily Statistics	The statistics are maintained for 24 hours. At midnight all statistics from the previous 24
		hours are cleared and a new 24-hour cycle is started. See the MS1 Voice/Fax Card
		User’s Manual for more information.
12. NETMan Status		Displays a current status of the optional network management system (if installed).

156