Compaq 113803-001 Dial-out status Enabled, Dial-In Status is automatically selected, Name, Slot #

3-57

Compaq System Configuration Utility Pager Settings for Booting into Compaq Utilities Continued

Pager Data		Setting	Description
Dial-out status		Enabled	Allows ASR-2 to dial out to a remote workstation. If you selected this option,
			Dial-In Status is automatically selected.
			To use the dial-out feature, set Dial-Out Status to Enabled and set the Dial-Out
			String to the correct phone number. You must also set the Reset Boot option to
			Boot Compaq Utilities. When the system restarts because of an ASR reset, the
			administrator is paged via Pager Status and Pager Dial String, the system
			restarts to the Compaq Utilities, and dials out to the phone number provided in
			the Dial-Out string. The dial-out number will be tried five times. If it fails to
			connect after five attempts, the modem is put in auto-answer mode.
Dial-out string	555-1234		Enter the dial string followed by the remote computer telephone number.
Network status		Enabled	To allow network access to Compaq Utilities, set Network Status to Enabled
			and make sure the Reset Boot option is set to Boot Compaq Utilities.
Network protocol			To use IPX network access, set Network Protocol to IPX. When the system
			restarts to the Compaq Utilities because of an ASR reset, it loads IPX network
			support. This enables remote access via NVT.
			To use IP network access, set Network protocol to IP. Also make sure to set
			Network IP address, Network IP net mask, and Network IP router address.
			When the system restarts to the Compaq Utilities because of an ASR reset, it
			loads IP network support. This enables remote access via Telnet.
			NOTE: The Network Status must be set to Enabled for network access.
Network controller		Compaq	For all Compaq Standard Network Controllers.
Network host		CPQHOU	Enter the network name of the server. Use underscores instead of spaces
name			within the name, for example, Compaq_Server. If you are using IPX network
			access to the Compaq Utilities, this server name is used to advertise NVT host
			services. This server name displays in the Compaq Insight Manager server list
			when it determines it can communicate via NVT. Set this name to be the same
			as the server name you assign when the host OS is running.
Network card slot		Slot #	Select the slot number of the network interface card you wish to use for
			network access to Compaq Utilities.
Network frame		ETHERNET_II	Select the frame type for your network. Selections include both Ethernet and
type			Token Ring topologies.
			Continued

Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide