
Power Backplane Board
The power backplane board is removed for replacement.
To remove the power backplane board:
1.Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.Remove the power supply(s). See
3.Disconnect all cables from the power backplane board.
4. | Loosen the two thumbscrews on the backplane board . |
5. | Rotate the power backplane board , then slide it out the rear of the chassis . |
1 |
2 |
3 |
Figure 2-36. Removing the power backplane board
Reverse steps 1 through 5 to replace the power backplane board.