Compaq 113803-001 manual Caster Mounting Support, Removing the caster mounting support

2-6Removal and Replacement Procedures

Caster Mounting Support

To remove the caster mounting support:

1.Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.

2.Remove the casters. See “Locking Casters” earlier in this chapter.

3.Remove the four T-15 screws securing the caster mounting support to the server.

4.Pull the caster mounting support away from the server.

Figure 2-2. Removing the caster mounting support

Reverse steps 1 through 4 to replace the caster mounting support.