Compaq 113803-001 manual Locking Casters, Removing the locking casters

2-5

Locking Casters

To remove the locking casters:

1.Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.

2.Place the server on its side.

3.Remove the three T-25 screws securing each caster to the caster mounting support.

4.Pull the locking casters away from the server.

Figure 2-1. Removing the locking casters

Reverse steps 1 through 4 to replace the casters.

Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide