Compaq 113803-001 manual Front Bezel Door, Removing the front bezel door

2-7

Front Bezel Door

To remove the front bezel door (tower model only):

1.Swing the front bezel door open approximately 45 degrees.

2.Lift the front bezel door up, then pull it away from the chassis.

Figure 2-3. Removing the front bezel door

NOTE: Drive cage may not be as illustrated.

Reverse steps 1 and 2 to replace the front bezel door.

Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide