Compaq 113803-001 Not been detected Com Port, Conflict, Or 4 Address, COM3 or COM4, Server, Cool

3-8Diagnostic Tools

POST Error Messages Continued

	Audible Beeps
Error Code	L=Long S=Short	Probable Source of Problem
703-CMOS reports a	2S	Coprocessor or configuration
coprocessor that has		error.
not been detected
1151-Com Port 1	2S	Both external and internal serial
Address Assignment		ports are assigned to COM1.
Conflict
1152-Com Port 2, 3,	2S	Both external and internal serial
or 4 Address		ports are assigned to COM2,
Assignment Conflict		COM3 or COM4.
1600-Server	None	Server Manager/R board failure.
Manager/R Failure		Error code displays after error
		message.
1610-Temperature	2S	Ambient system temperature
violation detected.		too hot.
Waiting for system to
cool

Recommended Action

1.Run the System Configuration Utility and correct.

2.Replace the coprocessor.

Run the System Configuration Utility and correct.

Run the System Configuration Utility and correct.

Run Diagnostics. Replace failed assembly as indicated.

Check fan in system environment.

1611-Fan [fan	2S	Required fan has failed.	Check fans.
description] failure
detected
1611-Fan [fan	2S	Fan not present.	Make sure fans are plugged in.
description] not
present

1612-Primary power	2S	Primary power supply has
supply failure		failed.
1613-Low System	None	Real time clock system battery
Battery		is running low on power.
1615-Power Supply	None	A power supply has failed.
Failure in Bay X
1616-Power Supply	2L, 2S	Single power supply system is
Configuration Error		installed in Bay 2 and not in
		Bay 1.
1701-SCSI Controller	None	A test on the Fast SCSI-2
failure		Controller failed

Replace power supply as soon as possible.

Run Diagnostics. Replace failed assembly as indicated.

Replace or check specified power supply.

Move power supply from Bay 2 to Bay 1.

Run Diagnostics. Replace failed assembly as indicated.

Continued