Compaq 113803-001 manual Pager Data Setting Description

3-56Diagnostic Tools

Table 3-23

Compaq System Configuration Utility Pager Settings

for Booting into Compaq Utilities

Pager Data		Setting	Description
Pager status		Enabled	Indicates if the pager feature is enabled or disabled.
Pager dial		ATDT	Indicates the pager dial string and delay before the pager message. Pagers
string	555-5555		typically use one of the following formats:
			Local pagers: ATDT 555-5555
			Wide area pagers: ATDT 1-800-555-5555,1234567#
Pager	1234567#		Represents a unique number (maximum seven digits, numeric only) that you
message			must designate to identify the server on your pager display. The ROM adds a
			three-digit code to the front of this number. The first two indicate the subsystem
			and the third indicates the severity of the error that caused the alert. The #
			symbol usually terminates the message. If no message is required, delete the #
			symbol.
Pager test		Select to test	Use this to test the current pager settings. Press Enter to dial the pager number,
		pager setup	and the pager message (if present) displays. You must configure the computer
			before testing the pager and the Pager Status must be set to Enabled. Do not test
			the pager if you are running remotely and are using only one modem.
Serial interface		COM1	Select the communications port for the modem used by the pager and the remote
			ASR-2 functions. The options are COM1 and COM2.
Dial-in status		Enabled	Set Dial-In Status to Enabled. Be sure the Reset Boot option is set to Boot
			Compaq Utilities. When the system starts because of an ASR reset, it starts to the
			Compaq Utilities, sets the Management Modem to auto-answer, and waits for the
			administrator to dial in and run the Compaq Utilities.
			You automatically disable this option when you configure the software error
			recovery start option to Boot Operating System. When ASR pages you, you cannot
			dial in unless ASR-2 exceeds 10, the threshold number of server restart retries.
			When this happens, ASR-2 restarts the server into the Compaq Utilities and
			places the modem in auto-answer mode.
			Continued