External Replacement Battery
The external replacement battery is installed if the permanent lithium battery fails.
To install the external replacement battery:
WARNING: This server contains an internal Lithium Manganese Dioxide, or a Vanadium Pentoxide, or an alkaline battery pack. There is risk of fire and burns if the battery pack is not handled properly. To reduce the risk of personal injury:
νDo not attempt to recharge the battery.
νDo not expose to temperatures higher than 60°C.
νDo not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
νReplace only with the Compaq spare designated for this product.
CAUTION: Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to Compaq, your authorized Compaq Partners, or their agents.
CAUTION: Do not remove the lithium battery from the system I/O board or permanent damage may occur. If the battery fails, install an external replacement battery.
1.Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.Remove the top access panel. See “Top Access Panel” earlier in this chapter.
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater
