2-30Removal and Replacement Procedures

Memory

Compaq ProLiant 3000 Servers ship standard with either 128 MB or 256 MB Synchronous DRAM (SDRAM) Dual Inline Memory Modules (DIMMs)installed in the DIMM 5 socket location. Memory can be expanded to a maximum of 4 GB. Install SDRAM DIMM modules one at a time in the proper socket. See Figure 2-27 and Table 2-2.

The following guidelines MUST be followed when installing or replacing memory:

Use only 32-, 64-, 128-, 256- or 512-MB SDRAM DIMMs.

Use Compaq SDRAM DIMMs only.

SDRAM DIMMs must all be rated 100 MHz and of the same manufacturer.

The recommended SDRAM DIMM installation order is:

First SDRAM DIMM in socket 5

Second SDRAM DIMM in socket 1

Third SDRAM DIMM in socket 6

Fourth SDRAM DIMM in socket 2

Fifth SDRAM DIMM in socket 7

Sixth SDRAM DIMM in socket 3

Seventh SDRAM DIMM in socket 8

Eighth SDRAM DIMM in socket 4

The following drawing shows the SDRAM DIMM socket locations.

SOCKET 5

SOCKET 6

SOCKET 7

SOCKET 8

SOCKET 1 SOCKET 2 SOCKET 3 SOCKET 4

Figure 2-27. SDRAM DIMM socket locations

Page 43
Image 43
Compaq 113803-001 manual Memory, Sdram Dimm socket locations