22 electrolux user guide

air-o-steam®

The air-o-steam®display always shows the:

“Selected Temperature” and the “Actual Temperature”

“Selected Time” and the “Time Remaining”

“Selected Core Temperature” and the “Actual Core Temperature”

This is to let the operator know (and supervisors) what has been selected for various cooking cycles, should an operator select the wrong choice then it’s easier for another person to see this and correct it.

During a cooking cycle, if the operator/supervisor sees that a wrong temperature, time, cooking mode etc has been selected, to correct it they simply press the correct button and hold for a few seconds which will then prompt the display to “flash”.

At this point the correct input can be made then the oven will memorise this and change the cycle accordingly, without having to stop and restart the cycle.

After 2 hours of steam operation, the air-o-steam®memory will send a command to release the water from the steam generator. This will only happen when the water temperature inside the boiler drops to 50 °C or below, normally the next time the oven’s main power is turned on.

At the end of any of the 4 Cleaning cycles the oven will automatically go on “stand-by” mode which turns power off to the steam generator elements, shuts off the oven lights so the only energy consumption is on the led display. This allows the operator to start a cleaning cycle then go home.

Page 22
Image 22
Electrolux 180 manual Air-o-steamdisplay always shows