HP 5M manual Transfer Roller

Transfer Roller

Before you begin these steps, turn the printer off and unplug the power cord.

1 Open the top cover and remove the toner cartridge.

2 Remove the transfer roller hook tool, located near the left end of the inside front panel.

3 Lift up on the chrome shaft using the hook tool.

4 Lift the roller up and out of its retaining slots. Discard the used roller.

C a u t i o n

Be careful not to touch the black sponge- rubber on the new transfer roller. Finger oils on the roller can cause print quality problems.

5 Slide the right end of the new roller (the end without the gear) into the right slot. Press the gear end into the left slot until it clicks into place.

Replace the transfer roller hook tool and toner cartridge. Close the top cover. Plug in the power cord and switch the printer on.

8-12 Maintaining and Adjusting the Printer

EN