HP 5 Configuration, Printing Demo, Printing Flash, Printing Font, List, Processing JOB, Ready

Message	Description	Recommended Action
PRINTING	This message is displayed during the	No action required. Press Job Cancel to stop
CONFIGURATION	formatting and printing of the configuration	the test.
PAGE	page printout.
PRINTING DEMO	Printing a Demonstration Page.	No action required.
PAGE
PRINTING FLASH	This message is displayed while the flash	No action required.
PAGE	directory page is being formatted and printed.
PRINTING FONT	This message is displayed while the PCL or	No action required.
LIST	PS FONT LIST is being formatted and printed.
PROCESSING JOB	This message is displayed when the printer is	No action required.
	processing a print job. A square will blink on
	the right side of the display panel.
READY	The default message. The printer is ready to	No action required.
	use.
RESETTING	This message is displayed during an Active	No action required.
ACTIVE I/O	I/O Reset.
RESETTING ALL	This message is displayed during an All I/O	No action required.
I/O	Reset.
RESTORING	This message is displayed during a cold reset.	No action required.
FACTORY	The printer returns all Printing, PCL, Job,
SETTINGS	Config, Mem Config, Parallel, Serial, MIO (if
	installed), and installed personality (PCL, PS,
	etc.) menu settings to their factory default
	configurations, except for page count, and
	display language.
WARMING UP	The printer is warming up and is not ready to	No action required. Wait until the printer
	accept data.	signals READY.

7-20 Solving Printer Problems

EN