HP 5M manual PostScript Configuration, PostScript configuration page the PS Config page item

	PostScript Configuration Page
	The PostScript configuration page (the PS CONFIG PAGE item in the
	Test Menu) is shown in Figure 5-2 on the following page.
Table 5-7
	PostScript Configuration Page Printout Items

ASettings: Current printer control panel default settings and product-specific information such as Printer Name and PostScript version. PostScript-specific settings include (but are not limited to):

HalftoneType: The current halftone type.

Wait Timeout: The PostScript timeout, not the timeout value in the Job Menu.

Printer Name: Name set by user (a network name, for instance).

Print Errors: Value set through the printer control panel’s PS Menu.

PostScript Version: The version of PostScript installed.

System Password/Job Password: Values are either “0” (default) or “Not Default” (a password is present).

Jam Recovery: Indicates whether Jam Recovery is ON or OFF.

BMemory: The value shows how PostScript uses printer memory. This may be useful for more experienced users since PostScript Level 2 allows users to configure memory parameters (see the PostScript Level 2 “Red Book” for specific information about these values).

CFlash Accessory: This setting will appear when the Flash SIMM is installed. It will include the number and the SIMM size

DPrintable Area: Gives the dimensions within the margins of the image area. Printable area is dependent on the amount of memory installed. The current default is shown in the hollow box.

EPage Count: Shows how many pages have been printed by the printer in all printer languages. You can use the page count to track printer use.

5-12 PostScript Printing

EN