HP 5M Form, Manual Feed OFF, Ret Off, Light, Medium, Economode OFF, Duplex OFF, Bind Long Edge

Table 3-2	Printing Menu Items (continued)
Item	Options		Explanation
FORM	60*	(110V printers)	Sets vertical spacing, from 5 to 128 lines, for default paper size.
(5 to 128 LINES)	64*	(220V printers)	Press [- Value +] once to change setting by increments of 1 or hold
			down to scroll by increments of 10.
MANUAL FEED	OFF*		Available only through Tray 1. When Manual Feed is ON and Tray
	ON		1 is empty, the printer goes off line when it receives a print job and
			displays MANUALLY FEED media size. See “Manually Feeding
			Pages” in Chapter 4.
RET	OFF		RET stands for “Resolution Enhancement technology.” It
	LIGHT		refines the print quality of characters and graphics by
	MEDIUM*		smoothing the fine gradations along the angles and curves of
	DARK		the printed image. See “Enhancing Resolution” in Chapter 6
			for more information.
ECONOMODE	OFF*		EconoMode substantially reduces the amount of toner on the
	ON		printed page; the result is similar to draft mode on some dot
			matrix printers. See “EconoMode Printing” in Chapter 6.
DUPLEX	OFF*		Determines whether the printer prints on both sides (duplex) or
	ON		one side (simplex) of a sheet. See “Printing with the Duplex
			Unit” in Chapter 4.
BIND	LONG EDGE*		Determines orientation of print on the page when using a
	SHORT EDGE		duplex unit. See “Specifying a Duplex Setup” in Chapter 4.

*Indicates factory default. Shading denotes optional items.

3 Using the Control Panel

EN Using the Printer Control Panel 3-7