HP 5M manual Loading Tray, To load Tray, Tray 2 holds about 250 sheets of 20 lb g/m2 paper

Loading Tray 2

Tray 2 holds about 250 sheets of 20 lb. (75 g/m2) paper.

To load Tray 2:

1 Pull Tray 2 straight out of the printer.

2 Slide a stack of paper into the tray until the paper is in solid contact with the rear of the tray. Do not fill above the arrows on the left rear of the tray.

N o t e

See the sections on letterhead and duplex printing later in this chapter for proper media orientation for specific jobs.

3 Press down on all four corners of the paper stack to ensure that the paper rests flat in the tray and fits under the front left corner tab.

4 Slide Tray 2 back into the printer.

C a u t i o n

Do not remove the tray while the printer is printing. This could cause a paper jam.

N o t e

If paper curls or skews excessively when printed, turn over the stack of paper in Tray 2.

4-6 Printing

EN