HP 5M manual Network Security, HP LaserJet Utility Macintosh

	Network Security
	This information is NOT repeated in this manual.
N o t e
	HP LaserJet 5/5M printers allow you to lock out other users’ abilities to
	change most printer control panel settings. This is done by setting a
	password and turning the lock command on. To verify, the message
	ACCESS DENIED will appear when you enter a change using the printer
	control panel.

There are three ways to implement printer security:

1HP LaserJet Utility for Macintosh users.

2JetAdmin for Novell networks.

3PJL escape sequence sent from any ASCII editor.

HP LaserJet Utility (Macintosh)

1Select the HP LaserJet Utility icon in the HP LaserJet folder on your hard drive.

2If necessary, click on the Select Printer button to select the HP LaserJet 5M.

3Select the Security panel by scrolling down and clicking on the key icon.

4Click on the Lock Control Panel button. You will be prompted to enter a password if the password has been set. If a password has not been set, go to the next step.

5Click the Set Password button. On the Printer Security dialog, enter the new password (numeric values can be set from 0 to 65535), and click on the OK button.

EN iii