HP 5M manual CLR Warn, Job, Auto OFF, Toner Density, Toner LOW Cont, Stop

Table 3-8	Configuration Menu Items (continued)
Item	Options	Explanation
CLR WARN	ON*	CLR WARN stands for “clearable warnings.” This setting determines how
	JOB	long a clearable warning will be displayed on the printer control panel.
		When set to ON, the warning is displayed until the [Go] key is pushed.
		If set to JOB, the warning will be displayed until the end of the print job in
		which it was generated.
AUTO CONT	OFF*	The auto continue function determines how the printer reacts to data and
	ON	printer errors. When auto continue is set to OFF, the printer displays an
		error message and goes off line until you press [Go].
		When auto continue is set to ON, the printer displays a message and goes
		off line for about 10 seconds, then comes back on line.
		If your printer is part of a network or remote spooling system, set auto
		continue to ON.
TONER DENSITY	1	Determines the relative darkness of print on the paper. To make print
	2	darker, choose a higher number; to make it lighter, choose a lower
	3*	number. See “Fine-Tuning Print Quality” in Chapter 6.
	4
	5
TONER LOW	CONT*	The TONER LOW message will first appear when the printer is almost out of
	STOP	toner (about 100 to 300 sheets can still be printed).
		If TONER LOW is set to CONT, the printer will remain on line and continue to
		print while the message is displayed.
		If TONER LOW is set to STOP, the printer will go off line and wait for further
		action. See “Clearing the TONER LOW Message” in Chapter 8.

*Indicates factory default.

3-12 Using the Printer Control Panel

EN