HP 5M manual Job Menu

Job Menu

You can change Job Menu items through your software application if you have installed an appropriate printer driver. See Figure 3-2, item D for the location of the Job Menu on the Menu Map.

Table 3-5	Job Menu Items
Item	Options	Explanation
RESOLUTION	300	At 600-dpi (dots per inch), the printer might need as much as four times
	600*	more memory to format a page than it needs at 300-dpi. For most
		purposes, 600-dpi is recommended. It is recommended that you use
		300-dpi for some bitmapped fonts and graphics designed to be printed at
		300-dpi or for compatibility with the HP LaserJet 3 family of printers.
PERSONALTY	AUTO*	The printer can be switched from its standard personality (language), PCL,
	PCL	to other personalities, such as PostScript. When PERSONALTY is set to
	POSTSCRIPT	AUTO, the printer analyzes each print job it receives and switches
	(optional)	personalities automatically.
PAGEPROTCT	AUTO*	This menu item will not be available unless a 21 PAGE TOO COMPLEX,
	ON	PRESS GO KEY error occurs (see “Understanding Printer Messages” in
		Chapter 7). Memory Enhancement technology (MEt) attempts to
		guarantee that all pages will print. If the page does not print, turn
		PAGEPROTCT to ON. This may increase chances of a 20 INSUFFICIENT
		MEMORY, PRESS GO KEY message. If this occurs, you need to add memory.
I/O TIMEOUT	15*	I/O timeout refers to the time, measured in seconds, that the printer waits
	(5 to 300)	before ending a print job. This setting allows you to adjust timeout for best
		performance. If data from other ports appear in the middle of your print
		job, increase the timeout value. Press [- Value +] once to change setting
		by increments of 1 or hold down to scroll by increments of 10.

*Indicates factory default.

3-10 Using the Printer Control Panel

EN