HP 5M manual To reserve and lock out Trays, Locking Tray

To reserve and lock out Trays:

This procedure does the following:

•Changes the configuration of Tray 1 from the primary printing source (TRAY 1=FIRST) to a reserved printing source (TRAY 1=CASSETTE), and specifies a media size.

•Selects a size for Tray 1 from the control panel.

Locking Tray 1

1Press [Menu] until CONFIG MENU appears.

2Press [Item] until TRAY 1=setting appears.

3Press [- Value +] until TRAY 1=CASSETTE appears, then press [Select].

4Press [Item] until LOCK TRAY=NONE appears.

5Press [- Value +] until LOCK TRAY=1 appears, then press [Select] to save your selection.

6Press [Item] until SIZE 1=setting appears.

7Press [- Value +] until the desired size of paper you have selected appears, then press [Select].

8Press [Go] to place the printer back on line.

9Place a stack of paper into Tray 1.

Tray 1 is now locked out from automatic selection. The printer will not draw from Tray 1 unless it is selected through a software application.

Locking Tray 2 and Optional Tray 3

•To reserve and lock out Tray 2 when no Tray 3 is present, first change the configuration of Tray 1 to TRAY 1=CASSETTE (follow steps 1-3).

•Tray 2 and the optional Tray 3 are locked out the same way as Tray 1 (follow steps 4 through 8).

4 Printing

EN

Printing 4-11