HP 5M manual To Load Envelopes into Tray, A paper jam

To Load Envelopes into Tray 1:

1	Open Tray 1 by pulling down on the
	top center of the door.
2 Pull out the tray extension until it
	snaps into place.
3	Place up to 10 envelopes against the
	left side of the tray, print-side up,
	with the postage-end in (see
	illustration for orientation). Slide the
	stack of envelopes into the printer as
	far as it will go without forcing it. If
	the stack of envelopes jams while
	feeding into the printer try reducing
	the amount of envelopes in the tray.
4	Slide the paper width guide to the left
	until it lightly touches the right side
	of the envelope stack without bending
	the envelopes.
N o t e
The paper width guide ensures that
envelopes feed correctly into the printer.
Envelopes must fit squarely and firmly
between the paper width guide and the left
side of Tray 1. If they do not, they may
feed into the printer incorrectly resulting		4 Printing
in a paper jam.

EN

Printing 4-17