HP 5M manual Loading Tray

Loading Tray 1

Tray 1 allows you to automatically feed up to 100 sheets of paper or manually feed one sheet at a time. Tray 1 can be used for standard and odd-sized papers, envelopes, labels, and transparencies.

To load Tray 1:

1Open Tray 1 by pulling down on the top center of the door.

2Pull out the tray extension until it clicks into place.

3Slide the paper width guide to the far right side of the tray.

4Place paper in the tray. The paper should be flush left, under the arrows on the paper guide tabs.

N o t e

See the sections on letterhead, envelope, and duplex printing later in this chapter for proper media orientation for specific jobs.

5Slide the paper width guide to the left until it lightly touches the stack of paper without bending the paper.

4 Printing

EN

Printing 4-7