HP 5M manual To Print Transparencies or Labels

To Print Transparencies or Labels:

1 Open Tray 1 by pulling down on the top center of the door.

2 Pull out the tray extension until it clicks into place.

3 Place up to 8 mm of labels or transparencies print-side-upin Tray 1.

C a u t i o n

Do not load transparencies up to the arrow on the paper guide tabs. The stack of transparencies shouldn’t reach higher than 2 mm below the arrow.

4 In your software’s print setup, specify

paper size and Tray 1 for the paper source.

5 After printing, remove the printed sheet from the output bin and lay it on a flat surface.

4 Printing

EN

Printing 4-19