HP b1000 manual 134

Changing Your Computer Hardware Configuration

Removable Media Devices

2.Remove the floppy disk drive bay’s rear cover by unscrewing the T-15 Torx/slotted screw as shown in Figure 5-31. Note that the floppy disk drive bay’s rear cover is located on the rear of the removable media chassis inside the system unit. Push the cover handle away from the rear of the removable media chassis approximately one inch. Next pull the cover handle toward you. Remove the floppy data and power cables from their connectors.

Figure 5-31 Removing the Floppy Disk Drive Bay’s Rear Cover

Rear Cover Handle

Power Cable	T-15
	Torx/Slotted
Rear Cover	Screw
Data Cable

134 Chapter 5