HP b1000 manual 142

Changing Your Computer Hardware Configuration

Hard Disk Drives

2.Open the hard drive slot by lifting the plastic release hook upward and pulling outward on the release lever as shown in Figure 5-38. As you pull outward on the release lever, the hard drive bracket will come out of its slot.

Figure 5-38 Removing the Hard Drive Bracket

Two T-15 Torx Hard Disk

Drive Mounting Screws

Hard Disk Drive Bracket

Plastic Release Hook

Release Lever

Two T-15 Torx Hard Disk Drive Mounting Screws

3.Mount the hard disk drive on the hard drive bracket using the four T-15 Torx shoulder screws that are stored on the mounting bracket. See Figure 5-38.

142 Chapter 5