HP b1000 manual Displaying the Status of the System I/O

The Boot Console Interface

Displaying the Status of the System I/O

Displaying the Status of the System I/O

The io command lets you identify all built-in I/O devices and optional I/O devices installed in the option slots. It is available in the Information Menu.

To use the IO command from the Information Menu of the boot console, type the following command at the prompt and press Enter:

Information Menu: Enter command> io

Information about the built-in and optional I/O devices is displayed.

I/O MODULE INFORMATION

				IODC	IODC
Path	Decimal	Type	Location HVER SVER Vers Dep
----	-------	----	-------- ---- ---- ---- ---
LAN	10/0/12/0	Ethernet	built-in 0060 a200 0x02 0x00
AUDIO	10/0/13/0	Audio	built-in
IDE	10/0/14/0	IDE	built-in 0060 a300 0x00 0x00
SUPERIO MISC	10/0/14/0	Bridge Device	built-in
FLOPPY	10/0/14/1/0	Floppy Disk	built-in
SERIAL_1	10/0/14/1/1	RS232 port	built-in 0060 8c00 0x01 0x00
SERIAL_2	10/0/14/1/2	RS232 port	built-in 0060 8c00 0x01 0x00
PARALLEL	10/0/14/1/3	Parallel port	built-in
USB	10/0/14/2	USB	built-in 0060 a900 0x95 0x00
SCSI	10/0/15/0	SCSI	built-in 0060 a300 0x00 0x00
FWSCSI	10/0/15/1	SCSI	built-in 0060 a300 0x00 0x00
GRAPHICS(2)	10/6/2/0	Display	slot 2	0070 8500 0x01	0x00
Main Menu: Enter command		>

Chapter 6 193