HP b1000 manual Chapter

Changing Your Computer Hardware Configuration

Use the following tools to remove or replace hardware parts when changing your configuration:

•Light-duty flat blade screwdriver with 150mm (6 inch) long shaft

•T-10 and T-15 Torx drivers. Note that the screws these drivers are used on have a recessed slot for use by flat-bladed screwdrivers.

•Needle-nose pliers

NOTE	Many of the HP-UX commands in this chapter will require that you
	become superuser (root). If you cannot log in as root, contact your
	system administrator.

Chapter 5 97