HP b1000 manual

Changing Your Computer Hardware Configuration

Removable Media Devices

5.Place the floppy disk blank in the floppy disk bracket and insert the four floppy disk mounting screws (T-10 Torx/slotted screws) into the bracket and tighten them using 6 inch-pounds of torque. See Figure 5-34.

Figure 5-34 Installing the Floppy Disk Blank and Bracket

Floppy Disk

Bracket

Bracket Screw

Floppy Disk

Mounting

Screws (there Floppy Disk Blank are four of them)

6.Slide the floppy disk blank and its bracket into the system unit chassis as shown in Figure 5-34.

Chapter 5 137