HP b1000 manual

Changing Your Computer Hardware Configuration

Hard Disk Drives

4.Replace the four mounting screws on the hard disk drive bracket to store them for future use. Slide the mounting bracket into its hard drive slot, and push inward on the release lever until the front of the hard dive bracket is flush with the system unit and the release lever snaps closed. See Figure 5-43. The front panel should now be replaced as explained in the section “Closing the System Unit Front Panel” in this chapter.

Figure 5-43 Replacing the Hard Disk Drive Bracket

Hard Disk

Drive Bracket

Plastic Release

Hook

Release Lever

Storage Locations for the

T-15 Should Screws

Chapter 5 147