Changing Your Computer Hardware Configuration
Removable Media Devices
6.Slide the floppy disk drive and its bracket into the system unit chassis as shown in Figure
7.Plug the floppy power cable into its connector. Next, plug the data cable into its connector. Note that the connectors are keyed for proper insertion. See Figure
Figure 5-28 Plugging In the Floppy Data and Power Cables
Power
Cable
Ferrite Bead | Data Cable |
|
8.Tighten the two floppy disk drive bracket screws as shown in Figure
Figure 5-29 Tightening the Bracket Screws
Bracket
Screw (hidden)
Bracket
Screw
Chapter 5 | 131 |
