HP b1000 manual 146

Changing Your Computer Hardware Configuration

Hard Disk Drives

3.Remove the four T-15 Torx shoulder screws from the hard disk drive and bracket. See Figure 5-42. You should be careful when removing the hard disk drive from its mounting bracket to avoid damaging it. Note that in order to remove the T-15 Torx screws from the sides of the hard disk drive you will have to have a T-15 Torx driver that is long enough to fit through the access holes on the sides of the hard disk drive bracket.

Figure 5-42 Removing the Hard Disk Drive from Its Bracket

Mounting

Grommet

(do not remove)

T-15 Torx

Should Screw

Hard Disk

Drive Mounting

Screw Access

Hole

Hard Disk Drive

Bracket

Plastic Release

Hook

Plastic Release

Lever

Hard Disk

Drive

146 Chapter 5