Changing Your Computer Hardware Configuration
System Unit Front Panel
4.Swing the panel outward on its left snap hinges until the panel comes free and place the front panel in a location where it cannot get broken.
Closing the System Unit Front Panel
Perform the following steps to close the system unit.
1.Locate the hinges on the left side of the front panel, and insert them into the holes located along the left edge of the system unit.
2.Rotate the front panel inward until you hear the two latch buttons snap in place. The front panel is now closed. If there is a need to lock the front panel, use the system unit keys that came with your system to lock the panel. These keys are located inside the front bezel below the floppy disk drive.
3.Plug in the system unit power cord, and power on the system.
Chapter 5 | 99 |
