HP b1000 manual 136

Changing Your Computer Hardware Configuration

Removable Media Devices

4.Remove both floppy disk bracket screws (T-15 Torx/slotted screws) and pull the floppy disk drive out of the chassis assembly as shown in Figure 5-33. Next remove the four floppy disk drive mounting screws (T-10 Torx/slotted screws) as shown in Figure 5-33 and remove the floppy disk drive from the bracket. You are now ready to attach the floppy disk drive blank to the floppy disk drive bracket.

Figure 5-33 Removing the Floppy Disk Drive

Floppy Disk Mounting Screw (there are four of them)

Bracket

Screw

Floppy Disk

Drive

Floppy Disk Bracket

136 Chapter 5