Huawei VP9050 manual Setting Up an H.239 Dual-Stream Conference, Designating the Dual Streams

HUAWEI VP9050 Executive Video Terminal
User Guide	6 Conference Initiation
----End

6.4 Setting Up an H.239 Dual-Stream Conference

During an H.239 dual-stream conference, two independent video stream channels, that is, the video and the presentation, can be transmitted; furthermore, two channels of video from the local site can be transmitted or two channels of video from a remote site can be received at the same time.

If the license on the terminal does not support H.239, the terminal can receive presentation, but cannot share presentation.

6.4.1 Designating the Dual Streams

Input sources and output destinations for the video and presentation must be chosen.

Choosing Input Sources

If multiple video-source devices are connected to the video input interfaces of the terminal, you can choose a channel of video as the source of the local video and another channel as the source of the local presentation.

The priority of the video is higher than that of the presentation, as shown from the following aspects:

After a conference is initiated, the remote sites view the video of the local site before the presentation.

During the layout switch in continuous presence mode, the remote sites can always view the video of the local site.

Choosing Output Destinations

During an H.239 dual-stream conference, if local video and presentation and remote video and presentation exist simultaneously and if multiple monitors are used at the local site, you can set the output interfaces for the videos and presentations as required.

6.4.2 Enabling the H.239 Mode

After enabling the H.239 mode, the video and the presentation can be sent simultaneously during a conference.

For details about how to enable the H.239 mode, see section 6.3 "Setting Conference Parameters." By default, the H.239 mode is enabled on the terminal.

The H.239 mode supports Presentation and Live.

Presentation: When the video is switched, the presentation remains unchanged. This mode is used when the presentation carries images, such as slides.

Live: The presentation viewed by each site is switched along with the video. This mode is used when the presentation carries videos.

Issue 03 (2011-12-10)	Huawei Proprietary and Confidential	44
	Copyright © Huawei Technologies Co., Ltd