Huawei VP9050 manual Creating a Group, Modifying

HUAWEI VP9050 Executive Video Terminal
User Guide		6 Conference Initiation
	Parameter	Description
	Category	This specifies the conferencing scenario of a site. The following
		describes different options:
		 If the site attends conferences hosted using traditional
		videoconferencing systems, select Ordinary site.
		 If the site attends conferences hosted using Huawei telepresence
		systems, select Telepresence site.
		If the site is a Cisco TelePresence site and attends conferences
		held using Huawei videoconferencing systems, select CT site.
	Number	This specifies the site number used to make calls between sites.
		 IP, SIP, and H.323 Phone site numbers are allocated by the
		videoconferencing service provider.
		 PSTN site numbers are telephone numbers.
	Type	This specifies the line used by the terminal to access the
		videoconferencing network.
	Rate	This specifies the rate supported by the terminal over the
		corresponding access line used by the site.
		It is recommended that you select the highest rate.
	IP address	This specifies the IP address of the site.
Step 3 Select Save.
	----End
Creating a Group

If certain sites join a conference regularly, they can be defined as a group. To create and define a group, do the following:

Step 1 On the Address Book screen, select Create Group to display the Create Group screen. Step 2 Enter a name for the group in the text box. The name cannot consist of only digits.

Step 3 Select the sites to be added to the group from the address book. Each selected site is marked with a tick (√) before the site name and all the sites that are added to the group appear in the site list.

Step 4 Select Save.

----End

Modifying

To modify the parameter settings of a defined site or group, scroll to the site or the group, and

then select , after the site name or the group name.

Issue 03 (2011-12-10)	Huawei Proprietary and Confidential	48
	Copyright © Huawei Technologies Co., Ltd