HUAWEI VP9050 Executive Video Terminal

 

User Guide

11 Terminal as a Display

11 Terminal as a Display

11.1Switching Between the Conference Mode and the PC Mode

In PC mode, the terminal is used as a display. If the terminal is in PC mode, you cannot access the web interface or the user interface controlled by the remote control.

The terminal automatically enters the conference mode and functions as a display when it is being started. You can press the menu key on the terminal to switch to the PC mode after the terminal is started. For details about the menu key, see Figure 1-1.

11.2 Adjusting the Display Effect

When the terminal is used as a display, you can press the menu key on the front panel to adjust parameters such as Image Setting, Color, Misc, and Language for the display. For the location of the menu key, see section 1.3 "Appearance of the Terminal."

11.3 Answering a Call

In PC mode, the terminal plays alert tones on incoming calls, but does not allow any calls to be answered. Therefore, you must manually switch to the conference mode to answer a call.

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

73

 

Copyright © Huawei Technologies Co., Ltd

 

Page 84
Image 84
Huawei VP9050 Terminal as a Display, Switching Between the Conference Mode and the PC Mode, Adjusting the Display Effect