Huawei VP9050 manual Selecting a Video Source, Local Video Source, Local Presentation Source

HUAWEI VP9050 Executive Video Terminal
User Guide	8 Video and Audio

Pressing on the remote control to switch between the full screen, picture in picture, 2 panes, and 3 panes.

Selecting Layout from the option bar to display the following screen from which you can select a desired layout:

−Remote video in full-screen mode

−Local video in full-screen mode

−A combination of the local video, remote video, local presentation, or remote presentation in picture-in-picture, two-pane, or three-pane mode

Figure 8-1Adjusting the Screen Layout

Besides the six layout icons shown in the preceding figure, the icon for the local or remote presentation may be seen if:

A presentation source is connected to the local site. In this case, the icon for the local presentation is displayed.

The local site receives the presentation shared by a remote site. In this case, the icon for the remote presentation is displayed.

The icon for the local or remote presentation disappears once the local presentation source is disconnected or the sharing of the remote presentation stops.

Before a conference starts, you can set the position of the small window in picture-in-picture mode. For details, see section 4.1 "Configuring the Built-In Camera."

8.5 Selecting a Video Source

You can set video input interfaces for the local video, local presentation, and remote video.

Local Video Source

Press , and then select a camera or other video sources.

Local Presentation Source

After a conference starts, select Presentation source from the option bar. From the

Presentation source screen, select a local presentation source.

Issue 03 (2011-12-10)	Huawei Proprietary and Confidential	65
	Copyright © Huawei Technologies Co., Ltd