HUAWEI VP9050 Executive Video Terminal

 

User Guide

13 Maintenance and Troubleshooting

Figure 13-4Diagnostic model of the terminal

Figure 13-4shows the diagnostics of three modules, including the audio module, video module, and network send/receive module.

Normal audio signal streams are as follows:

Local microphone → 1 → 5 → communication network → 6 → 7 → remote speaker

Local speaker ← 2 ← 5 ← communication network ← 6 ← 8 ← remote microphone

Normal video signal streams are as follows:

Local camera → 3 → 5 → communication network → 6 → 9 → remote display

Local display ← 4 ← 5 ← communication network ← 6 ← 10 ← remote camera

Sound and Color Bar Tests

Table 13-3describes sound and color bar tests.

Table 13-3Sound and color bar tests

Test

Item to Be Tested/Objective

Signal Stream

 

 

 

 

Sound test

2 audio output

2

→ speaker

 

 

 

 

Color bar test

4 video output

4

→ display

 

 

 

 

To perform a sound test, choose Diagnostics > Sound & Color Bar Test > Sound Test. The terminal plays an embedded tone to test the audio output quality.

To perform a color bar test, and then choose Diagnostics > Sound & Color Bar Test > Color Bar Test. The terminal displays 6 color bars on the display to test the color output quality.

Loopback Tests

The terminal can transmit audio or video data on a channel to simulate the actual application and test whether the output is satisfactory. You can perform a local loopback test to check the local network connection or a remote loopback test to check the remote network connection.

Issue 03 (2011-12-10)

Huawei Proprietary and Confidential

89

 

Copyright © Huawei Technologies Co., Ltd

 

Page 100
Image 100
Huawei VP9050 manual Sound and Color Bar Tests, Loopback Tests, Test Item to Be Tested/Objective Signal Stream