HUAWEI VP9050 Executive Video Terminal |
|
| ||
User Guide |
| 13 Maintenance and Troubleshooting | ||
|
|
|
|
|
| Problem |
| Possible Cause | Solution |
|
|
|
|
|
|
|
| The current video output | Set the current video output |
|
|
| interface is set to display the | interface to display the remote |
|
|
| local video. | video. |
|
|
|
|
|
| The local video is |
| The output mode of the video | Ensure that the mode of the |
| not displayed |
| output interface is set | video output interface and the |
| properly. For |
| incorrectly. | cable that is used match each |
| example, the video |
|
| other. |
| is in black and white |
|
| Check whether the cable is |
| or blinks in black |
|
| connected correctly or replace |
| and white. |
|
| |
|
|
| the cable if necessary. | |
|
|
|
| |
|
|
|
|
|
| After the local site |
| After you perform a local | Send the terminal to the relevant |
| joins a conference, |
| video loopback test, the video | distributor for maintenance. |
| the video of a |
| quality is poor, which |
|
| remote site is not |
| indicates that faults exist on |
|
| clear. For example, |
| the local video module. |
|
| there is mosaic, |
|
|
|
|
| When the scene captured by a | Set the main camera of the remote | |
| frozen image, or |
| ||
| discontinuity in the |
| remote camera is changed, the | site to focus automatically. |
| video output. |
| remote video is not clear |
|
|
|
| because the remote camera is |
|
|
|
| not set to focus automatically. |
|
|
|
| In this case, the remote camera |
|
|
|
| is set to focus on a near or far |
|
|
|
| scene. |
|
|
|
|
|
|
|
|
| When the conference rate is | If the conference rate is lower than |
|
|
| lower than 256 kbit/s, the | 256 kbit/s, it is recommended that |
|
|
| audio protocol is set | you set the audio protocol to |
|
|
| incorrectly. For example, | G.728 to reduce the bandwidth |
|
|
| access the Call Statistics | used for audio transmission. |
|
|
| screen. If the conference rate |
|
|
|
| is 256 kbit/s and if the audio |
|
|
|
| bandwidth is 64 kbit/s, the |
|
|
|
| video bandwidth will be only |
|
|
|
| 196 kbit/s. Therefore, the |
|
|
|
| video quality is poor. |
|
|
|
|
|
|
|
|
| Low video bandwidth is | Try to avoid initiating a |
|
|
| available for the local site | conference when the network is |
|
|
| because the network is busy. | likely to be busy. |
|
|
|
|
|
|
|
| Certain data is lost during | Replace the relevant network |
|
|
| transmission, because the | connection device (such as the |
|
|
| quality of a network | optical fiber transceiver). |
|
|
| connection device (such as an |
|
|
|
| optical fiber transceiver) is |
|
|
|
| poor. |
|
|
|
|
|
|
Issue 03 | Huawei Proprietary and Confidential | 94 |
| Copyright © Huawei Technologies Co., Ltd |
|