HUAWEI VP9050 Executive Video Terminal |
|
User Guide | 3 Network Settings |
| Parameter | Description |
|
|
|
| Enable proxy server | When the terminal needs to register with the IP multimedia |
|
| subsystem (IMS) for deploying services, enable the proxy server |
|
| and set its address. |
|
| NOTE |
|
| Borne by the standard IP protocol, the IMS uses voice over IP (VoIP) |
|
| applications based on the standard SIP applications of the 3rd Generation |
|
| Partnership Project (3GPP) to provide fixed and mobile multimedia services |
|
| for operators. |
|
|
|
| Proxy server address | The proxy server needs to forward the registration request from the |
|
| terminal to the SIP server in the IMS network when the terminal is |
|
| registering with the IMS network. |
|
|
|
| Conference Service | Before initiating a conference from the terminal on an IMS |
| Number | network, you must set this parameter and ensure that the terminal |
|
| setting is consistent with the setting on the IMS network device. |
|
| The conference service number can be obtained from the |
|
| administrator of the IMS network device. |
|
|
|
| Site number | This specifies the site number of the local terminal. When the local |
|
| terminal is registered with the SIP server, another terminal can call |
|
| the local terminal using this site number. The site number can |
|
| contain only digits. |
|
|
|
| User name | The user name is used by the SIP server to identify the local |
| Password | terminal after the terminal is registered with the SIP server. The |
| user name and the password can contain only digits and letters. | |
|
| |
|
|
|
Step 2 Save the settings. |
| |
|
|
|
3.3.5 Setting SNMP Parameters
When the terminal needs to be managed by the MediaManager remotely, the Simple Network Management Protocol (SNMP) parameters of the terminal must be set.
The terminal communicates with the ViewPoint MediaManager (MediaManager for short), which is the software for managing network elements over SNMP. Considered as a network element, the terminal is managed by the MediaManager remotely. Using the MediaManager, the following operations can be performed on the terminal:
Setting terminal parameters, such as IP parameters, H.323/SIP parameters, E1/4E1 parameters, firewall parameters, network address book parameters, video input parameters, video output parameters, audio input parameters, and whether to enable Web access
Importing records to or exporting records from the network address book
Querying terminal status
Querying the terminal alarms
Diagnosing the network faults on the terminal
Restarting or upgrading the terminal
Issue 03 | Huawei Proprietary and Confidential | 18 |
| Copyright © Huawei Technologies Co., Ltd |
|
