HUAWEI VP9050 Executive Video Terminal |
|
User Guide | 7 Conference Control |
7.3.12 Setting the Continuous Presence
The continuous presence function is used to display the videos of two or more sites on the same monitor simultaneously. The number of sites whose videos are displayed and the layout of the videos vary according to continuous presence modes.
This function is available only when continuous presence resources have been reserved for the conference.
To set the continuous presence, do the following:
Select a pane. From the
If a site already exists in the pane selected, the new site will replace the original site. You can select Delete All to delete all the sites in the continuous presence.
7.3.13 Enabling and Disabling Voice Activation
The voice activation function is used during ongoing discussions in the conference. The site with the loudest voice is viewed by the other sites in the conference.
You can select the sensitivity based on experience after enabling the voice activation function.
The videoconferencing system sets a threshold based on the sensitivity selected. If the volume of one or multiple sites exceeds the threshold, the video of the site with the highest volume is broadcast.
If no site exceeds the threshold, the conference status remains unchanged.
7.3.14Releasing Chair Control Rights
A
For a
The function of revoking chair control rights is available only to the site that initiates or pays for the conference.
7.3.15 Enabling Discussion
The chair site can enable the discussion function as required to cancel certain ongoing conference control operations, such as broadcasting sites.
This Discussion function is used to cancel the following operations performed by the chair site:
Broadcasting sites
Muting the speaker
Muting the microphone
Giving the floor
The discussion function provides the following features:
Issue 03 | Huawei Proprietary and Confidential | 56 |
| Copyright © Huawei Technologies Co., Ltd |
|