Motorola TMS320C6711D warranty Recommended operating conditions‡, MIN NOM MAX Unit, Ioh

SPRS292A − OCTOBER 2005 − REVISED NOVEMBER 2005

absolute maximum ratings over operating case temperature range (unless otherwise noted)†

Supply voltage range, CVDD (see Note 2)	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . − 0.3 V to 1.8	V
Supply voltage range, DVDD (see Note 2)	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . −0.3 V to 4	V
Input voltage range	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to DV DD + 0.5 V
Output voltage range	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to DV DD + 0.5 V
Operating case temperature ranges, TC	(default)	. . . . . . 0_C to 90_C
	(A version) [C6711DGDPA and C6711DZDPA]	. . . −40 _C to105_C
Storage temperature range, Tstg	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . −65 _C to 150_C

†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 2: All voltage values are with respect to VSS.

recommended operating conditions‡

				MIN	NOM	MAX	UNIT
CVDD	Supply voltage, Core	−250 only		1.33	1.4	1.47	V
				1.14§	1.20§	1.32	V
DVDD	Supply voltage, I/O			3.13	3.3	3.47	V
VSS	Supply ground			0	0	0	V
VIH	High-level input voltage	All signals except CLKS1, DR1, and	RESET	2			V
		CLKS1, DR1, and RESET		2
		All signals except CLKS1, DR1, and				0.8
VIL	Low-level input voltage		RESET				V
		CLKS1, DR1, and RESET				0.3*DVDD
		All signals except ECLKOUT, CLKOUT2, CLKS1, and				–8
IOH	High-level output current¶	DR1					mA
		ECLKOUT and CLKOUT2				–16
		All signals except ECLKOUT, CLKOUT2, CLKS1, and				8	mA
		DR1
	Low-level output current¶
I
OL		ECLKOUT and CLKOUT2				16	mA
		CLKS1 and DR1				3	mA
TC	Operating case	Default		0		90	_C
	temperature
V	Maximum voltage during overshoot (See Figure 19)					4#	V
OS
V	Maximum voltage during undershoot (See Figure 20)					−0.7 #	V
US
TC	Operating case	A version (C6711DGDPA and C6711DZDPA)		–40		105	_C
	temperature

‡The core supply should be powered up prior to (and powered down after), the I/O supply. Systems should be designed to ensure that neither supply is powered up for an extended period of time if the other supply is below the proper operating voltage.

§These values are compatible with existing 1.26−V designs.

¶Refers to DC (or steady state) currents only, actual switching currents are higher. For more details, see the device-specific IBIS models.

# The absolute maximum ratings should not be exceeded for more than 30% of the cycle period.

62 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443