NCT Group 2000M, 99M manual Intersection Calculations in the Selected Plane

16 Automatic Geometric Calculations

16.3 Intersection Calculations in the Selected Plane

Intersection calculations discussed here are only executed by the control when tool radius compensation (G41 or G42 offset mode) is on. If eventually no tool radius compensation is needed in the part program turn the compensation on and use D00 offset:

With tool radius compensation:	Without tool radius compensation:
G41(or G42) ...Dnn	G41(or G42) ...D00
...	...
intersection calculations	intersection calculations
...	...
G40	G40

122