NCT Group 2000M, 99M manual G90 G30 P1 X500 Y200 G29 X700 Y150

8 The Reference Point

taken into account in the new coordinate system.

In the second phase it will move from the intermediate point to the point v defined in instruction G29. If coordinate v has an incremental value, the displacement will be measured from the intermediate point.

When the cutter compensation is set up, it will move to the end point by taking into account the compensation vector.

A non-modal code.

An example of using G30 and G29:

...
G90
...
G30	P1 X500 Y200
G29	X700 Y150
...
...
	Fig. 8.3-1

54