NCT Group 2000M, 99M manual Canned Cycles for Drilling

17 Canned Cycles for Drilling

4.spindle orientation (M19)

5.linear interpolation between the drilling axis and the spindle, with the spindle rotated in clockwise direction

6.-

7.linear interpolation between the drilling axis and the spindle, with the spindle being rotated counter-clockwise

8.-

9.with G98, rapid-traverse retraction to the initial point

10.-

Fig. 17.1.9-2

In the case of G84.3, the operations of the cycle are

1.rapid-traverse positioning in the selected plane

2.-

3.rapid-traverse movement to point R

4.spindle orientation (M19)

5.linear interpolation between the drilling axis and the spindle, with the spindle rotated in counter-clockwise direction (-)

6.
7.	linear interpolation between the drilling axis and the spindle, with the spindle
	being rotated clockwise (+)
8.	-
9.	with G98, rapid-traverse retraction to the initial point
10.	-

150