NCT Group 99M, 2000M manual Is equivalent to the block below

16 Automatic Geometric Calculations

Fig. 16.2-1
For	exampl
e:
G17 G90 G0 X57.735 Y0 ...
G1 G91...
X100 ,A30	(this specification is
	equivalent to X100 Y57.735
	where 7.735=100Atg30°)
Y100 ,A120	(this specification is
	equivalent to X-57.735 Y100
	where !57.735=100/tg120°)
X-100 ,A210	(this specification is
	equivalent to X-100 Y-57.735
	where !57.735=!100Atg30°)
Y-100 ,A300	(this specification is
	equivalent to X57.735 Y-100
	where 57.735=!100/tg120°)
	Fig. 16.2-2

LNote:

– Straight line with angle together with chamfer or corner rounding can be defined in one block. For example:

X100 ,A30 ,C5

Y100 ,A120 ,R10

X-100 ,A210

–Angle specification at address ,A can also be applied in drilling cycles. In this case it is acknowledged in the course of positioning execution in the selected plane.

For example block

G81 G91 X100 ,A30 R-2 Z-25

is equivalent to the block below:

G81 G91 X100 Y57.735 R-2 Z-25

121