20 Custom Macro
Interface output signals - #1100–#1115, #1132
16 interface output signals can be issued, one by one, by assigning values to variables #1100 through #1115.
Name of system variables | Interface input with reference to the |
| PLC program |
#1100 | Y[CONST+000] |
#1101 | Y[CONST+001] |
#1102 | Y[CONST+002] |
#1103 | Y[CONST+003] |
#1104 | Y[CONST+004] |
#1105 | Y[CONST+005] |
#1106 | Y[CONST+006] |
#1107 | Y[CONST+007] |
#1108 | Y[CONST+010] |
#1109 | Y[CONST+011] |
#1110 | Y[CONST+012] |
#1111 | Y[CONST+013] |
#1112 | Y[CONST+014] |
#1113 | Y[CONST+015] |
#1114 | Y[CONST+016] |
#1115 | Y[CONST+017] |
where CONST=O_LINE*10 and O_LINE is a parameter. Thus, any arbitrary interface output word can be issued or read.
The values of the above variables may be 0= the contact at the output is open, 1= the contact at the output is closed.
The above 16 outputs can be issued simultaneously by using variable #1132. Depending on the system variables assigned to the single outputs, the output value will be
Accordingly, with outputs #1102 and #1109 are on, the rest of outputs being off, variable #1132 must output the value
176
